Continuous light Emergency light Emergency lighting Exit Emergency exit Escape route light Emergency...

Product Overview

• Pattern Name: Down Arrow

LED emergency light EMERGENCY LIGHTING

- Good
Processing - Easy assembly

-Modern Design - Left, Right Bottom, UP

- Wall mounting

Technical data: Power supply 230 V AC/50 Hz
Power consumption 1.2 W Batteries 3.6 V / 1000mAh Charging current 50 mA Battery
Charging time 24 hours Emergency light duration 180 minutes Charge indicator Red LED
Battery operation protection recharging and discharging fluorescent lamp LEDs
Protection class IP 22 Certificate number 98-1628 Working temperature 0-60 °C
Ambient humidity Up to 90% relative humidity Dimensions 250 × 110 × 50 mm
Weight 500 g Assembly instructions

1. The emergency lights are half closed
packed.

2. Carefully open the lamp housing.

3. Place the
Intermediate plate and the transparent cover to the side.

4. Mount the
Lower part on the wall with 2 dowels.

5. Take the intermediate plate and
connect the supply cable to the connection terminal.

6. The
The corresponding location of the connection terminal is at the bottom of the circuit diagram
see.

7. The red LED lights up when voltage is present.

8. Put the
Intermediate plate on the lower part.

9. When JMP1 is removed, the
Emergency light only in the event of a storm

10. Place the clear cover
put it back on and carefully press it under light pressure in the lower part
until the cover closes securely and tightly.