Description
LED emergency light EMERGENCY LIGHTING - Good workmanship - Easy to install -
Modern Design - Left, Right Bottom and EXIT - Wall Mounting Technical
Data: Power supply 230 V AC/50 Hz Power consumption 6 W batteries 3.6
V / 1000mAh charging current 50 mA battery charging time 24 hours emergency light duration 90 minutes
Charge indicator Red LED Battery operation protection Recharge and
Discharge fluorescent lamp 12x5050 LEDs protection class IP 22 certificate number
98-1628 Working temperature 0-60 °C Ambient humidity Up to 90% relative
Humidity Dimensions 250 × 110 × 50 mm Weight 500 g Assembly instructions 1.
The emergency lights are packed half closed. 2. Open the case of the
Light carefully. 3. Put the intermediate plate and the transparent one
Cover to the side. 4. Mount the lower part on the wall with 2 dowels.
5. Take the intermediate plate and connect the supply cable to it
Connection terminal. 6. The corresponding location of the connection terminal is at the bottom
can be seen in the circuit diagram. 7. The red LED lights up when voltage is present. 8th.
Place the intermediate plate on the base. 9. Set the
Put the transparent cover back on and press it gently under light pressure
Apply pressure in the lower part until the cover closes securely and tightly